Mechanically Seamed Metal Roofs
Low Pitch Standing Seam Roofing
Bread panning for flat, double lock roofs at the the ridge or head-wall with an inverted dog ear, overlapping the last pocket fold for ultra low pitch roofs under 2:12.
Double Locked Metal Boot
Rigid metal boot sleeve that locks to the panel. Sealed & folded inside to preserve the exterior without removing factory paint to weld or solder in 24-gauge.
Seamless Kick-Out Detail
Single panels divert water to gutters and not behind siding. Held with screws on high spot of wall or with hidden clips on the rakes. Only done with mechanical panel.
45 Degree Mechanical Lock Detail
Deter ice damming, fire embers, wind uplift, & hail resistance with kirigami cut, locked, & folded under drip edge, 24-gauge eave seams. Mechanical only.
Dry-In Material
Self adhesive and fire rated Underlayment installs. Roofs held with screws in hidden clips to wood substrate.
Fixed Clips
Fabrication of our clips, used to hold down our mechanically seamed 1-1/2" height panels in 24 gauge. From our left-over material. Painted material adds a layer of protection against rust.
On-Site Roll-Forming
1-1/2" mechanical lock standing seam panels, 16" wide in 24-gauge or 26, with clip reliefs around the edges to hide screw head imprint. Bead ribs in the center as an option for reduced oil canning. This panel has higher S-5 clamp grip tolerance, ideal for solar and snow retention systems.
