Metal Cap
Coping metal can be installed over EPDM, TPO, wood, concrete, or any exposed material, covering your parapet walls with a nailable surface. Proper installation and experience leaves many options open for preference in aesthetics or/and functionality.
Cleated Metal Coping
Different widths can be fabricated and connected with proper overlap. Most coping metal is held with a neoprene screw in the back, for easier installation and removal.
Permanent Beam on Coping Metal
Creating raised pocket folds into the cap metal, prevents years of damage incurred by sitting water, where ice has the ability to expand after melting many times during the course of a year.
Double Cleated Coping Metal
A cleat may be applied on both sides of the face of the coping to allow a hidden fastener installation. A standing seam miter can be made instead of caulked rivets over lapped sheets.
Vertical Coping & End-caps
A vertical coping and/or end-cap will be put per installers visual preference, unless otherwise stated. A standing seam can be fabricated into the end-cap to put snow clamp and hold lightning rod brackets and any other components needing to attach without penetrating metal coping.
Radius Curved Metal Cap
This parapet wall was covered with a 3-piece radius cap with standing seam overlap connections. Hidden clips under the coping.
Chimney Caps
Single or double flue chimney caps can be fabricated and installed on site. Metal pipe sleeve collar that wraps around flue, is locked into flat panel.